As an indispensable and important equipment in modern industry, the cutting effect of metal laser cutting machines directly affects the quality and production efficiency of the product. However, in practical applications, sometimes the problem of insufficient cutting effect is encountered, which not only affects the performance of the product but also may increase the difficulty and cost of subsequent processing. For this problem, we can start from the following aspects to find solutions.
Check and adjust the power of the laser
The depth of laser cutting is closely related to the power of the laser. The greater the power, the deeper the cutting depth. Therefore, when it is found that the cutting effect is not deep enough, you should first check whether the output power of the laser reaches the set value. If the power is insufficient, you can increase the output power through the control panel, but you should also check whether the supporting equipment such as the laser power supply and laser water cooler can meet the higher power requirements to ensure the safe and stable operation of the equipment.
Optimize the focusing quality of the laser beam
The spot size formed after the laser beam is focused by the focusing mirror directly affects the cutting accuracy and depth. The smaller the spot, the higher the energy density, and the deeper the cutting depth. Therefore, the cleanliness and integrity of the focusing mirror should be checked regularly to ensure that the laser beam can be accurately focused on the workpiece. At the same time, you can also consider replacing a higher-quality focusing mirror to improve the focusing quality of the laser beam.
Adjust cutting speed and focal position
The cutting speed is closely related to factors such as laser power and workpiece material. Too fast or too slow cutting speed may lead to insufficient cutting depth. Therefore, the cutting speed should be adjusted according to the actual situation to achieve the best cutting effect. At the same time, the choice of focal position is also crucial. Too high or too low a focal position will affect the cutting depth. When adjusting the focal position, factors such as workpiece material and thickness should be considered comprehensively.
summary
In summary, the problem is that the cutting effect of the metal laser cutting machine is not deep enough, we can solve it from multiple aspects such as laser power, laser beam focusing quality, cutting speed and focal position, and cutting process parameters. By comprehensively applying these methods and means, the cutting depth and quality can be significantly improved to meet the needs of industrial production. At the same time, we should also pay attention to the daily maintenance and care of the equipment to ensure that the equipment is always in good working condition and provide strong guarantees for production.
DXTECH is a comprehensive enterprise integrating R&D, production, and sales. It has more than 16 years of experience in the field of industrial lasers and can realize any processing in metal or non-metal industries. If you are interested in the DXTECH metal laser cutting machine, please contact us!
